9.
Remove the two pulleys [A] [B] and the belt [C]. (
10. Remove the bracket [A]. (
•
Place a sheet of paper underneath the bracket, and then put the bracket on the sheet. Otherwise, the
grease applied to the gear in the bracket may adhere to the floor.
11. Remove the recycling shutter unit [A]. (
•
Place a sheet of paper underneath the recycling shutter unit, and then put the recycling shutter unit
on the sheet. Otherwise, the grease applied to the gear in the unit may adhere to the floor.
×2,
×1, bearing × 1)
×3, Gear × 1)
4.Replacement and Adjustment
×1)
339