Ricoh SP 8400DN Field Service Manual page 1210

5.System Maintenance
It takes 3 minutes to update Java VM.
9. After completing the update, remove VM Card Type P13 from the SD memory card reader/writer of your PC.
10. Insert VM Card Type P13 into SD Card Slot 1 (Upper slot) of the machine.
Activating SDK Applications
1.
Make sure that the VM card is fully inserted, and then turn the main power ON.
2. Log in as the machine administrator from Operation panel / Web Image Monitor.
3.
Set "Auto Start" whose status is "OFF" to "On".
4. Compare the current heap size settings and the values recorded before update.
If the settings are not the same as the recorded values, correct the settings to the recorded values.
5.
Enable the disabled SDK application.
472