Ricoh SP 8400DN Field Service Manual page 1202

5.System Maintenance
Operation panel (normal panel)
Operation panel (smart panel)
Canceling the update
It is possible to cancel the Auto Remote Firmware Update (ARFU) or update in recovery mode from the operation
panel.
But this is not possible while updating the operation panel itself. On the other hand, the update for the operation
panel will run at the final stage of the update. Thus canceling the update at that stage has no real effect.
When the update is cancelled, the machine will reboot when updates for all modules of one of the following
devices is done.
1. Engine Board
2. Controller Board
3. Operation Panel
For example, when the update process is cancelled while updating the first module of the operation panel, the
machine will reboot when all modules in the operation panel have been updated.
The firmware contents included in the package can be referred to in the release note in SERES release of the
package.
The next update will run 76 hours after the cancellation. The old (cancelled) package will be discarded if the
package downloaded 76 hours later is the latest.
464
Device name SC number
SC845-03
SC845-04