•
The SMC list saving may take from 2 to 3 minutes to complete.
•
Press [CANCEL] to abort executing.
10. After "Completed" is displayed, press [Exit].
11. Exit the SP mode.
Notes on Using the SMC List Card Save Function
•
If you remove the SD card while executing the SMC List Card Save function, it may cause the machine to
stall.
•
You can check the access (reading/writing) by the indicator on the slot.
•
When you remove the SD card, be sure to check that the access indicator is off in advance.
•
If the machine stalls, turn the power off and then back on.
5.System Maintenance
495