Ricoh SP 8400DN Field Service Manual page 1364

6.Troubleshooting
There is no message displayed prompting the user to cancel or continue with the 51st original.
Specifications: Maximum sheet capability for staple jobs
Finisher SR3210
Finisher SR3230
Fusing Offset Occurs at the Edge or Center of the Paper
Symptom:
Fusing offset occurs at the edge or center of the paper.
The customer may report a strange odor coming from the machine.
Cause:
The temperature is too low at the edge or center of the paper when the paper enters the fusing unit.
Solution:
If the symptom occurs, do the procedure in the Flowchart below.
626
Model Corner Stapling
50 sheets
50 sheets