4.Replacement and Adjustment
Charge Roller, Cleaning Roller
•
Before replacing these rollers, set SP3-701-018 for the charge roller and/or SP3-701-019 for the
cleaning roller to "1" and turn the main power switch OFF.
•
If you have to turn the power on again before replacing the part, execute the SP again before replacing
the part.
•
After replacing the rollers, turn the main power switch ON.
1.
Remove the OPC drum.
2.
Remove the charge roller and cleaning roller [A] with its bearing.
3.
Split the assembly into the charge roller [A] and cleaning roller [B].
324
(OPC
Drum)