4.Replacement and Adjustment
4.
Paste the adjustment sheet(s) on the reference points located on the back side of the laser unit (two points on
the inside and/or one point on the front side).
•
A set of four sheets is provided as service parts. The number of sheets to be pasted depends on the
condition of the image.
•
If lines slant down to the left [A], paste one or two sheets on the front side.
•
If lines slant down to the right [B], paste one or two sheets at each position on the rear side.
•
Adjustable amount: 0.5mm – 0.6mm/sheet
5.
Do step 1 and 2 again to check that there is no parallelogram image.
430