Ricoh SP 8400DN Field Service Manual page 1333

SC No. Type
SC876- D Log Data Error 2
02
An error was detected in the handling of the log data at power on or during machine
operation.
Log encryption is enabled but encryption module is not installed.
•
•
SC No. Type
SC876- D Log Data Error 3
03
An error was detected in the handling of the log data at power on or during machine
operation.
Inconsistency of encryption key between NV-RAM and HDD.
•
•
•
SC No. Type
SC876- D Log Data Error 4
04
An error was detected in the handling of the log data at power on or during machine
operation.
•
•
Initialize the HDD (SP5-832-004).
SC No. Type
SC876- D Log Data Error 5
05
An error was detected in the handling of the log data at power on or during machine
operation.
•
•
•
•
•
Error Name/Error Condition/Major Cause/Solution
Replace or set again the encryption module.
Disable the log encryption setting.
Error Name/Error Condition/Major Cause/Solution
Disable the log encryption setting.
Initialize LCS memory (SP5801-019).
Initialize the HDD (SP5-832-004).
Error Name/Error Condition/Major Cause/Solution
Log encryption key is disabled but the log data file is encrypted. (NVRAM data
corruption)
Log encryption key is enabled but the log data file is not encrypted. (NVRAM data
corruption)
Error Name/Error Condition/Major Cause/Solution
Only the NV-RAM has been replaced with one previously used in another machine.
Only the HDD has been replaced with one previously used in another machine.
Attach the original NV-RAM.
Attach the original HDD.
With the configuration that caused the SC, initialize the HDD (SP5-832-004).
6.Troubleshooting
595