Ricoh SP 8400DN Field Service Manual page 1247

SC code
664-03 VODKA Program Startup Error
669-36 EEPROM: Verify Error
669-37 EEPROM: Failure Detection Error
682-01 Invalid Device ID
682-06 Channel Error
682-11 Device Error
682-16 Communication Aborted (error during communication)
682-21 Communication Timeout
682-26 Device Stopped (logically stopped)
682-31 Requested Buffer Full
682-36 PCU: Verify Error
687-00 PER Not Received Error
780-01 Tray 1 (Upper optional paper tray) Protection Device Intercept Error
781-01 Tray 2 (Lower optional paper tray) Protection Device Intercept Error
791-00 No Bridge Unit when Finisher is Present
Controller SC
Automatic reboot target SC is as follows. For details of Automatic reboot, refer to
SC code
641-00
670-02
673-10
816-01
816-02
816-03
816-04
816-05
816-07
816-08
816-09
816-10 to 12
816-13
816-14
816-15 to 18
816-19
816-20
816-22
Communication error between BCU and Controller board
Engine start up error when the machine is in operation
Flair connection error of Smart Operation Panel
Subsystem error
Sysarch (LPUX_GET_PORT_INFO) error
Transition to STR was denied.
Interrupt in kernel communication driver
Preparation for transition to STR failed.
Sysarch (LPUX_GET_PORT_INFO) error
Sysarch (LPUX_ENGINE_TIMERCTRL) error
Sysarch (LPUX_RETURN_FACTOR_STR) error
Sysarch (LPUX_GET_PORT_INFO) error
open() error
Memory address error
open() error
Double open() error
open() error
Parameter error
Name
SC Automatic
Name
6.Troubleshooting
Reboot.
509