6.Troubleshooting
•
The print speed will be reduced (See the chart below).
Thick paper 2 -> Thick paper 3
Thick paper 3 -> Thick paper 4
•
Auto duplex cannot be used (See the chart below).
Postcards: Thick paper 2 -> Thick paper 3
Side effects: The following may occur, depending on the paper thickness.
•
Paper curl
•
Decreased productivity
Workaround C:
Increase the target fusing temperature by 5 degrees using the following SPs:
•
SP 1-105-003
•
SP 1-105-007
•
SP 1-105-011
•
SP 1-105-015
If the symptom occurs with 1200 dpi printing, also increase the target temperature by 5 degrees for these SPs as
well:
•
SP 1-105-107
•
SP 1-105-137
•
SP 1-105-111
Side effects: Paper curl may occur.
Workaround D:
Change the target temperature using the following SPs as shown below.
•
SP 1- 105-019: 145 deg -> 150 deg
•
SP 1- 105-023: 130 deg -> 140 deg
•
SP 1- 105-027: 135 deg -> 140 deg
•
SP 1- 105-141: 140 deg -> 145 deg
•
SP 1- 105-115: 120 deg -> 125 deg (For 1200 dpi mode)
Side effects: Paper curl may occur.
Workaround C':
Increase the target fusing temperature by 5 more degrees using the following SPs:
•
SP 1-105-003
•
SP 1-105-007
•
SP 1-105-011
•
SP 1-105-015
For 1200 dpi printing:
628