6.Troubleshooting
For SR3230
The docking bracket for SR3230 [A] (and its screw [B]) can adjust the side-to-side registration.
To adjust the side-to-side registration:
Change the position of the standard bracket [B] by rotating it 90 degrees as shown by the arrow. This makes the
docking bracket [A] easier to slide horizontally.
Then reattach the docking bracket [A] to the mainframe.
If the paper shifts toward the front
Slide the docking bracket forward by the amount which corresponds to that of the shift, to move the finisher in the
same direction.
e.g.: When paper has shifted by 4 mm from the center toward the front (2 mm/division of the scale), move the
docking bracket toward the front by 4 mm (2 divisions).
[A]: Proof tray
[B]: Docking Bracket Screw
618