Ricoh SP 8400DN Field Service Manual page 1222

5.System Maintenance
6.
Turn ON the main power switch.
7. Enter the SP mode.
8.
Do SP5-846-051 (Backup All Addr Book).
9. Exit the SP mode, and then turn OFF the main power switch.
10. Remove the SD card form the SD card slot 2 (lower).
11. Install the SD slot cover.
•
If the capacity of SD card is not enough to store the local user information, an error message is
displayed.
•
Make sure that the write protection of an SD card is unlocked.
•
Carefully handle the SD card, which contains user information. Do not take it back to your location.
Upload
1. Turn OFF the main power.
2.
Remove the SD card slot cover [A] (Coin screw x 1).
3.
Install the SD card, which has already been uploaded, into SD card slot 2 [A: Lower Slot].
•
Check whether the card is properly in the SD card slot. When a SD card is inserted, a click is heard,
and it is locked.
•
To remove the card, release by pressing once.
4. Turn ON the main power.
484