4.Replacement and Adjustment
PCU/Development Unit
Before Replacing the PCU or Development Unit
•
Before replacing the PCU, set SP3-701-002 (Manual New Unit Set: PCU) to "1" and turn off the main
power switch. After replacing the PCU, turn on the main power.
•
Before replacing the development unit, set SP3-701-023 (Manual New Unit Set: Development Unit) to
"1" and turn off the main power switch. After replacing the development unit, turn on the main power.
Replacement Procedure
1.
Remove the PCDU. (PCDU)
2.
Remove the face plates [A] [B].
320