Ricoh SP 8400DN Field Service Manual page 1726

bit [PS] PS Criteria
3
Change the number of PS criterion used by the PS interpreter to determine whether a job is PS
data or not.
For details, refer to
bit Increase max. number of stored jobs.
4
Changes the maximum number of jobs that can be stored on the HDD. The default (disabled) is
100. If this is enabled, the max. will be raised to 750 or 1000 depending on the model.
bit DFU
5
bit Method for determining the image rotation for the edge
6 to bind on.
If enabled, the image rotation will be performed as they were in the specifications of older
models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit Letterhead mode printing
7
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex job, are not routed
through the duplex unit. This could result in problems with letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
1001
1-001-006
1001 [Bit Switch]
1-001- Bit Switch 7
007
bit Print path
"Printing Features".
[Bit Switch]
Bit Switch 6
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
0
Disabled
4.Controller SP Mode Tables
Pattern3
Disabled
(100)
-
Disabled
Disabled
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
1
Enabled
Pattern1
Enabled (750)
-
Enabled
Enabled
(Duplex)
0 1
- -
- -
- -
- -
- -
- -
- -
- -
265