Ricoh SP 8400DN Field Service Manual page 1731

4.Controller SP Mode Tables
3
bit DFU
4
bit Change the user ID type displayed on the operation panel
5
As of 15S models, the Login User Name can be displayed on the operation panel. The user ID
type displayed on the operation panel can be changed by configuring BitSwitch #12-5 as
follows:
- 0 (default): Login User Name
- 1: User ID. If this is enabled, User ID will be displayed, which is equivalent to the behavior
exhibited in 14A and earlier models.
bit AirPrint
6
For 15S and later models that support AirPrint, AirPrint can be disabled by changing this Bit
Switch from 0 (default) to 1.
bit DFU
7
1003 [Clear Setting]
1-003-001 Initialize Printer System
Initializes settings in the "System" menu of the user mode.
1-003-003 Delete Program
1004 [Print Summary]
Prints the service summary sheet (a summary of all the controller settings).
1-004-001 Print Printer Summary
1005
1-005-001
1007 [Supply Display]
Sets displaying remaining supply amount information or not.
0: Displays remaining supply amount information
1: Does not display remaining supply amount information
2 PCU
4 Int. Transfer
270
[Display Version]
Printer Version
Displays the version of the controller firmware.
CTL*
CTL*
-
Disabled
Enabled
-
CTL*
CTL*
CTL [- / - / -]
[Execute]
CTL [ - / - / - ]
[0 or 1 / 1 / 1 /step]
-
Enabled
Disabled
-
[- / - / -]
[Execute]
[- / - / -]
[Execute]