Ricoh SP 8400DN Field Service Manual page 1000

2.Installation
6.
Press [Restart] when the following message appears.
7. Print out the "Configuration Page", and then check if this option is correctly recognized.
•
User Tools > Machine Features > Printer Features > List/Test Page > Configuration Page
Note that the description of Firmware Version shown in the printed Configuration Page differs between
Clone PS and Adobe PS.
When PostScript3 Unit Type P13 (Adobe PS)
is installed
Clone PS
Initial Settings for the Printer Driver
After installation of an SD card, configure the settings for the printer driver in accordance with the type of PS to
be used.
The same printer driver, PS3 printer driver, can be used for printing either for Adobe PS or Clone PS.
•
Setting items (Windows):
In an environment where interactive communication is enabled, the machine attempts to acquire information
to perform automatic configuration.
When manual configuration is to be performed, select "Adobe PostScript" if Adobe PS is used, and choose
"Emulated PostScript" if Clone PS is used.
1. On the [Start] menu, click [Devices and Printers].
2.
Right-click the icon of the printer you want to use.
3.
Click [Printer properties].
4. Click the "Accessories" tab and configure settings for Adobe PS/Clone PS using the PostScript pull-down
262
PS type Description of Firmware Version
RPCS [x.xx.xx] Adobe PostScript 3 [x.xx], Adobe
PDF [x.xx]
RPCS [x.xx.xx] PS3 [x.xx], PDF [x.xx]