Ricoh SP 8400DN Field Service Manual page 1164

4.Replacement and Adjustment
Image Adjustment
Registration - Leading Edge/Side-to-Side
A: Leading Edge Registration (4.2 ± 1.5 mm)
B: Side-to-side Registration (2 ± 1.5 mm)
Make sure that the registration is adjusted within the adjustment standard range as shown above.
After doing the registration adjustment, do the Blank Margin Adjustment in the next section.
1. Check the leading edge registration [A] for each paper feed station, and adjust them using SP1-001.
Tray1: Thin
Tray1: Plain
Tray1: MidThick
Tray1: Thick1
Tray1: Thick2
Tray1: Thick3
Tray1: Thick4
Tray2: Thin
Tray2: Plain
Tray2: MidThick
Tray2: Thick1
Tray2: Thick2
Tray2: Thick3
Tray2: Thick4
Bypass: Thin
Bypass: Plain
Bypass: MidThick
Bypass: Thick1
Bypass: Thick2
426
Tray SP No.
SP1-001-001
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-005
SP1-001-006
SP1-001-007
SP1-001-008
SP1-001-009
SP1-001-010
SP1-001-011
SP1-001-012
SP1-001-013
SP1-001-014
SP1-001-015
SP1-001-016
SP1-001-017
SP1-001-018
SP1-001-019
Threshold
4.2 ± 1.5 mm
4.2 ± 1.5 mm
4.2 ± 1.5 mm