Ricoh SP 8400DN Field Service Manual page 1326

6.Troubleshooting
SC No. Type
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD cards
used for Firmware Update by a Customer Engineer.
SC No. Type
SC868- D SD card access error
01
The SD controller returned an error during operation.
(An error occurred at the mount point of /mnt/sd1)
•
•
SD card that starts an application
•
•
•
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD cards
used for Firmware Update by a Customer Engineer.
SC No. Type
SC868- D SD card access error
02
The SD controller returned an error during operation.
(An error occurred at the mount point of /mnt/sd1)
•
•
SD card that starts an application
•
•
588
Error Name/Error Condition/Major Cause/Solution
•
Check the SD card insertion status.
•
Replace the SD card.
•
Replace the controller board.
Error Name/Error Condition/Major Cause/Solution
SD card defective
SD controller defective
Turn the main power off and check the SD card insertion status.
•
If no problem is found, insert the SD card and turn the main power on.
•
If an error occurs, replace the SD card.
SD card for users
•
In case of a file system error, reformat the SD card (using the "SD Formatter"
made by Panasonic).*
•
In case of a device access error, turn the main power off and check the SD card
insertion status.
•
If no problem is found, insert the SD card and turn the main power on.
•
If an error occurs, use another SD card.
If the error persists even after replacing the SD card, replace the controller board.
Error Name/Error Condition/Major Cause/Solution
SD card defective
SD controller defective
Turn the main power off and check the SD card insertion status.
•
If no problem is found, insert the SD card and turn the main power on.
•
If an error occurs, replace the SD card.
SD card for users
•
In case of a file system error, reformat the SD card (using the "SD Formatter"