Ricoh SP 8400DN Field Service Manual page 1297

SC No. Type
•
•
SC No. Type
SC667- D Slave1 Device Mode Setting Error
10
The machine detects the Slave1 mode error when starting up, or recovery from energy
saver mode.
•
•
•
SC No. Type
SC667- D Macaron1 Mode Setting Error
40 The machine detects the Macaron1 mode error when starting up, or recovery from energy
saver mode.
•
•
•
•
SC No. Type
SC669 EEPROM Communication Error
SC669- D EEPROM OPEN: ID error
01
SC669- D EEPROM OPEN: Channel error
02
SC669- D EEPROM OPEN: Device error
03
SC669- D EEPROM OPEN: Communication abort error
04
SC669- D EEPROM OPEN: Communication timeout error
05
SC669- D EEPROM OPEN: Operation stopped error
06
SC669- D EEPROM OPEN: Buffer full
Error Name/Error Condition/Major Cause/Solution
Turn the power off/on.
Replace the BCU.
Error Name/Error Condition/Major Cause/Solution
BCU defective (Parts implementation defect, solder scrap, implemented parts defect,
etc.)
Turn the power off/on.
Replace the BCU.
Error Name/Error Condition/Major Cause/Solution
BCU defective (Parts implementation defect, solder scrap, implemented parts defect,
etc.)
Turn the power off/on.
Replace the BCU.
Replace the IPU.
Error Name/Error Condition/Major Cause/Solution
6.Troubleshooting
559