Ricoh SP 8400DN Field Service Manual page 993

SD Card Appli Move
Overview
Since there are only two SD card slots (one of them is a service slot), three or more SD card applications cannot
be used simultaneously.
However, if multiple SD card applications are merged, three or more SD card options can be used.
This function is referred to as the "SD card merge function".
The "SD card merge function" is a function which enables the use of three or more functions within the capacity
of two SD cards by physically transferring the function of one SD card to other SD cards (all SD card options can
be stored in two SD cards).
However, SD card applications are under license, therefore, since an SD card license after merge is transferred to
the target SD card, it cannot be used even if it is moved to the target machine.
Also, a process to prevent illegal copying is performed.
•
After merge, store the empty SD card in the location shown below.
1.
Remove the small cover [A].
2.
Open the right cover, then remove the screw.
3.
Release the hooks on the inside of the upper front cover [A] by pulling the cover's sides outward, and remove
2.Installation
255