Ricoh SP 8400DN Field Service Manual page 1359

Ricoh a3 size black and white laser printer.

Hide thumbs Also See for SP 8400DN:

Table of Contents

[A]: Proof Tray

[B]: Docking Bracket Screw

If paper shifts toward the rear

Slide the docking bracket backward by the amount which corresponds to that of the shift, in order to move the

finisher in the same direction.

e.g.: When paper has shifted by 4mm from the center toward the rear (2 mm/division of the scale), move the

docking bracket backward by 4 mm (2 divisions).

[A]: Proof Tray

[B]: Docking Bracket Screw

After the adjustment, check the side-to-side registration by feeding paper out to the proof tray. If the

shift has not been solved, adjust the docking bracket (screw for the docking bracket) slightly again.

Stacking Problem at the Finisher SR3210

Stacking problems may occur due to paper curl depending on the paper type / size. In this case, it is possible to

avoid the problem by attaching the auxiliary tray.

6.Troubleshooting

Chapters

Table of Contents