Ricoh SP 8400DN Field Service Manual page 1209

6.
Remove the SD card slot cover [A] (Coin screw x 1).
7.
Remove VM Card Type P13 from the SD Card Slot 1 [A] (Upper slot).
Updating JavaVM and Inserting the VM Card
1.
Insert VM Card Type P13 into the SD memory card reader/writer of your PC.
2. Check that the SD memory card reader/writer is detected on your PC, and then write down the drive letter. (If
the SD memory card reader/writer is detected as (F:), the drive letter is "f")
3.
Download the update modules from the Firmware Download Center.
4. Unzip the downloaded file, and then execute the .exe file.
5.
The folder is generated.
6. Execute the .bat file in the folder.
7.
Input the drive letter following the message "Please input drive letter of SD card [a - x]: ". (If the SD memory
card reader/writer is detected as (F:), input "f")
8. Press the [Enter] key to start updating Java VM.
5.System Maintenance
471