Ricoh SP 8400DN Field Service Manual page 1011

answer a polling request from the external RCG.
2: The embedded RCG device is set. In this status, the external RCG unit cannot answer a polling request.
3: The registered device by the external RCG is being set. In this status the embedded RCG device cannot be
set.
4: The registered module by the external RCG has not started.
•
SP5-990-002 (SP Print Mode: SP(Mode Data List)
Prints the configuration sheets of the system and user settings: SMC.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the latest settings
may not be collected when the SMC is printed.
•
SP5-811-003 (Machine No. Setting: ID2 Code Display)
Sets the ID-2 code used to identify the @remote device at installation.
•
SP5-816-063 (Remote Service: Proxy server IP address)
This SP sets the address of the proxy server used for communication between the RCG device and the
gateway. Use this SP to set up or display the customer proxy server address.
The address is necessary to set up the embedded RCG-N.
The address display is limited to 127 characters. Characters beyond the 127
characters are ignored.
This address is customer information and is not printed in the SMC report.
•
SP5-816-064 (Remote Service: Proxy server Port number)
This SP sets the port number of the proxy server used for communication between the embedded RCG-N and
the gateway. This setting is necessary to set up the embedded RC Gate-N.
This port number is customer information and is not printed in the SMC report.
•
SP5-816-065 (Remote Service: Proxy User ID)
This SP sets the HTTP proxy certification user name.
The length of the name is limited to 31 characters. Any character beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC report.
•
SP5-816-066 (Remote Service: Proxy Password)
This SP sets the HTTP proxy certification password.
The length of the password is limited to 31 characters. Any character beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC report.
•
SP5-816-202 (Remote Service: Letter Number DFU(SSP))
Allows entry of the number of the request needed for the RCG-N device.
•
SP5-816-203 (Remote Service: Confirm Execute)
Executes the inquiry request to the @Remote GW URL.
•
SP5-816-204 (Remote Service: Confirm Result DFU(SSP))
Displays a number that indicates the result of the inquiry executed with SP5816 203.
•
SP5-816-205 (Remote Service: Confirm Place DFU(SSP))
Displays the installed section informed from G/W for response of request number inquiry if the section is
enrolled on the G/W.
2.Installation
273