Ricoh SP 8400DN Field Service Manual page 998

2.Installation
PostScript3 Unit Type P13 (M513-22, -23, -24)
Accessory Check
No.
1 SD Card (PostScript3 Unit)
2 PS3 Decal
Overview of PostScript3 Unit Type P13 (Adobe PS)
This machine is equipped with a clone program for emulating Adobe PostScript/PDF (hereafter "Clone PS") as a
standard feature. So, by factory default, it can perform printing using PostScript 3 and PDF Direct Print, in
addition to RPCS.
However, the variety and number of built-in fonts (device fonts) differ between Adobe PS and Clone PS,
sometimes resulting in different printing results.
To address the possible customer needs listed below, the PostScript3 Unit Type P13 is made available as an
option.
•
When you want to use device fonts supplied with Adobe PS.
•
Since forms and ledgers have been created based on device fonts supplied with Adobe PS, a changeover to
Clone PS requires redesign of these documents.
•
From the viewpoint of precise printing operation, it is impossible to accept any differences in output results
in comparison with Adobe PS.
For details of the functions of Adobe PS and Clone PS, refer to
Installation procedure (Adobe PS)
•
When installing this option, turn OFF the main power and unplug the power cord from the wall socket.
If installing without turning OFF the main power, an electric shock or a malfunction may occur.
•
Clone PS and Adobe PS cannot be run simultaneously. If PostScript3 Unit Type P13 (Adobe PS) is
installed, Clone PS will be disabled.
•
When installing more than one SD card, perform the merge operation
260
Description
Adobe PS vs. Clone
Q'ty
1
1
PS.
(SD Card Appli Move).