Ricoh SP 8400DN Field Service Manual page 1730

bit Print job interruption
1
0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print queue, it will
wait for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the currently printing job and start
printing immediately.
bit DFU
2
bit DFU
3
bit Add "Apply Auto Paper Select" is the condition
4
that decides if the device's paper size or paper type
should be overwritten.
If this BitSwitch is set to "1" (enabled), the "Apply Auto Paper Select" setting will decide if the
paper size or paper type that is specified in the device settings should be overwritten by the job's
commands when "Tray Setting Priority" is set to "Driver/Command" or "Any Type".
- Apply Auto Paper Select = OFF: Overwritten (priority is given to the job's commands)
- Apply Auto Paper Select = ON: Not overwritten (priority is given to the device settings)
bit DFU
5
bit The tray selection setting when a paper size or
6 paper type mismatch occurs.
If the tray selection setting is enabled, selecting the tray that the "Apply Auto Paper Select"
setting is configured to "Off" cannot be done when a paper size or paper type mismatch occurs.
bit DFU
7
1001 [Bit Switch]
1-001- Bit Switch C
012
bit DFU
0
bit DFU
1
bit DFU
2
bit DFU
4.Controller SP Mode Tables
Does not allow
interruption
-
-
Disabled
-
Disabled
-
0
-
-
-
-
Allow
interruption
-
-
Enabled
-
Enabled
-
1
-
-
-
-
269