Ricoh SP 8400DN Field Service Manual page 1740

3
@PJL USTATUS PAGE
4
@PJL USTATUS PAGE
5
@PJL USTATUS PAGE
6@PJL USTATUS PAGE
7
@PJL USTATUS PAGE
8
@PJL USTATUS PAGE
9
@PJL USTATUS JOB
END
NAME="Microsoft Word - TEST_page1-3"
PAGES=9
<comment> The page count of all three copies is returned.</comment>
Behavior of USB Printer Detection
An MFP/LP connected via USB sends its product name and unique serial number. With the data, the machine
determines whether requires a printer driver for the USB device to be installed.
SP5-844-005 allows you to change how to determine the MFP/LP requires a printer driver installation:
OFF
•
If SP5-844-005 is set to OFF, the unique serial number of the device is sent to the computer. As a result, if the
device is swapped out for a device of the same product, pop-up messages will appear, because the serial
numbers between the two are different.
• Level 1
If SP5-844-005 is set to Level 1, a common serial number for the product such as "RICOH MP 305+" series
is sent to the computer. As a result, if the device is swapped out for a device of the same product, pop-up
messages will not appear because the devices are recognized as having the same serial number.
• Level 2
If SP5-844-005 is set to Level 2, a common serial number for all GW/GW+ models is sent to the computer.
As a result, if a GW/GW+ device is swapped out for a different GW/GW+ device, pop-up messages will not
appear because the devices are both recognized as being based on GW/GW+.
5.Software Configuration
279