Ricoh SP 8400DN Field Service Manual page 1203

Checking the ARFU Result
1.
Enter the SP mode.
2.
Press [Firmware update].
3. Press [Update].
4.
Press [Update Package Information].
5. If the firmware package is the same as the one on the global server, the update was completed successfully.
Otherwise, check the result using the logging data.
In SP7-520-041 to -045 (Update Log: Auto:Version), you can check the versions of the packages updated by
ARFU. (-041 displays the latest result. It is also printed on the SMC sheet.)
Checking the Result Using the Logging Data
1.
Enter the SP mode.
2.
Press [System].
3. Check the results for ARFU by SP7-520-051 to 060 (Update Log: Auto:Result)
"-051" is the latest update result. For details about the number of each result log, see the next section "Related
SP".
Related SP
SP Number Selection
SP5-886-111 0: OFF
1: ON
SP5-886-112
0: OFF
1: ON
SP5-886-113 0 to 23
9
SP5-886-114 0 to 23
17
SP5-886-115
0: OFF
1: ON
SP5-886-116 Display
only
SP5-886-117 1 to 24
1
Def.
Sets auto update ON/OFF by ARFU.
Will not run the update when update prohibited time setting is ON and the
current time is in the range of the time set.
•
Start time < End time: Prohibited time is from the start time to the end
time on the same day.
•
Start time > End time: Prohibited time is from the start time to the end
time on the next day.
•
Start time == End time: Prohibited time setting is disabled. (Update will
not be prohibited.)
Even when the update function is disabled, downloading the package is
allowed.
The downloaded package can be used with SFU.
Displays when the latest package check will run.
Set time for the next version check after retry.
5.System Maintenance
Overview
465