Ricoh SP 8400DN Field Service Manual page 1322

6.Troubleshooting
SC Tables: SC8xx (Controller)
SC816-01 to SC877-00
SC No. Type
SC816 [0x0000] Energy save I/O subsystem error
SC816-01 D
SC816-02 D
SC816-03 D
SC816-04 D
SC816-05 D
SC816-07 D
SC816-08 D
SC816-09 D
SC816-10 to 12 D
SC816-13 D
SC816-14 D
SC816-15 to 18 D
SC816-19 D
SC816-20 D
SC816-22 D
SC816-23, 24 D
SC816-25 D
SC816-26 to 28 D
SC816-29, 30 D
SC816-35 D
SC816-36 to 99 D
SC No. Type
SC840- D EEPROM access error
•
00
•
584
Error Name/Error Condition/Major Cause/Solution
Subsystem error
Sysarch (LPUX_GET_PORT_INFO) error
Transition to STR was denied.
Interrupt in kernel communication driver
Preparation for transition to STR failed.
Sysarch (LPUX_GET_PORT_INFO) error
Sysarch (LPUX_ENGINE_TIMERCTRL) error
Sysarch (LPUX_RETURN_FACTOR_STR) error
Sysarch (LPUX_GET_PORT_INFO) error
open() error
Memory address error
open() error
Double open() error
open() error
Parameter error
read() error
write () error
write() communication retry error
read() communication retry error
read() error
Subsystem error
Energy save I/O subsystem detected some abnormality.
•
Energy save I/O subsystem defective
•
Energy save I/O subsystem detected a controller board error (non-response).
•
Error was detected during preparation for transition to STR.
•
Turn the main power off/on.
•
Replace the controller board.
Error Name/Error Condition/Major Cause/Solution
During the I/O processing, a reading error occurred. The 3rd reading failure causes this
SC code.
During the I/O processing, a writing error occurred.