Ricoh SP 8400DN Field Service Manual page 1177

Firmware type
Printer apl
Websupport
WebUapl
What is Included in the Firmware Package
Modules included in the firmware package are indicated by ticks ( ) in the firmware download web site.
Firmware not included in the package requires updating by SD cards, etc.
Procedure
•
An SD card is a precision device, so when you handle an SD card, respect the following.
•
When the power is switched ON, do not insert or remove a card.
•
During installation, do not switch the power OFF.
•
Since the card is manufactured to high precision, do not store it in a hot or humid location, or in direct
sunlight.
•
Do not bend the card, scratch it, or give it a strong shock.
•
Before downloading firmware to an SD card, check whether write-protection of the SD card is canceled.
If write-protection is enabled, an error code (error code 44, etc.) will be displayed during download, and
the download will fail.
•
Before updating firmware, remove the network cable from this machine.
•
During software update, disconnect network cables and interface cables, remove wireless boards, etc.,
(so that they are not accessed during the update).
Preparing the SD Card
•
When preparing the SD card, do not include other applications in the one for the VM version update.
1. Format an SD card.
2. Create a folder in the SD card and name it "romdata".
3. Download the firmware from SERES BB and store it in the "romdata" folder.
4. Unzip the downloaded file.
5. From the unzipped folder, move the necessary firmware files (e.g. M0ANxxxx.fwu)"fwu" file to the
"romdata" folder created in step 2.
•
Do not remove the SD card from SD card slot until data writing is finished.
•
Do not put multiple machine firmware programs on the same SD card. Copy the only model firmware
you want.
Smart Operation Panel – CPU board
Smart Operation Panel – CPU board
Smart Operation Panel – CPU board
5.System Maintenance
Firmware location
439