Ricoh SP 8400DN Field Service Manual page 1205

No. Result
4 HDD error
5 Version information obtain error
6 Update download error
7 Name resolution error
8 Auto update setting disabled
9 Update prohibited time
10 Update postponed due to machine in
use
11 Update cancelled by user
12 Offline failed
13 Update successful
14 Update failed
15 Update deemed completed
Cannot download or update as the HDD cannot be used.
Cannot download or update as the version information cannot
be obtained.
Cannot download or update as the update download failed.
In non @Remote method, this shows that the download failed
because there was no proxy set.
Cannot download or update as the name cannot be resolved
upon downloading the update.
The package has been downloaded but will not run the update
as SP5-886-111 (auto update setting) is disabled and SP5-886-
115 (auto download setting for SFU) is enabled.
Cannot start to update as the auto update prohibited time setting
(SP5-886-112) is enabled and the time update initiated was in
the range of prohibited time (SP5-886-113 to 114).
Or the day which update was initiated was a day for which
update was prohibited (SP5-886-120).
Cannot start update due to the following conditions when
update was initiated.
•
The machine is in use by a user (the panel was used within
30 seconds)
•
Machine offline for other reasons
•
Operation prohibited
•
Displaying SP/UP menu
•
Firmware update is running with another method
•
Configuration change prohibited
•
Verifying the operation panel (smart panel)
Update was cancelled because a user selected "Cancel" in the
popup shown before starting the update.
Cannot start to update as the machine is offline for other
reasons.
Update was started and successfully completed.
Update was started but failed.
Update was cancelled after the process was initiated because a
user selected "Cancel". There is no need to resume the update
due to one of the following reasons:
•
A newer update has been released and received.
•
When retrying ARFU, the update has already been
completed by another method.
5.System Maintenance
Description
467