Ricoh SP 8400DN Field Service Manual page 1725

4.Controller SP Mode Tables
004 bit DFU
0
bit DFU
1
bit DFU
2
bit IPDS print-side reversal
3
If enabled, the simplex pages of IPDS jobs will be printed on the front side because of printing
on the back side of the page. This might reduce printing speed.
bit DFU
4
bit DFU
5
bit DFU
6
bit DFU
7
1001 [Bit Switch]
1-001- Bit Switch 5
005
bit Show "Collate Type", "Staple Type" and "Punch Type"
0 buttons on the operation panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type from the
operation panel. The available Types will depend on the device and configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
bit Multiple copies if a paper size or type mismatch occurs
1
If a paper size or type mismatch occurs during the printing of multiple copies, only a single copy
is output by default. Using this BitSw, the device can be configured to print all copies even if a
paper mismatch occurs.
bit Prevent SDK applications from altering the contents of a
2 job.
If this BitSw is enabled, SDK applications will not be able to alter print data. This is achieved
by preventing SDK applications from accessing a module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of SDK applications on
data.
264
-
-
-
Disabled
-
-
-
-
0
Disabled
Disabled
(single copy)
Disabled
-
-
-
Enabled
-
-
-
-
1
Enabled
Enabled
(multiple)
Enabled