Ricoh SP 8400DN Field Service Manual page 1302

6.Troubleshooting
SC No. Type
SC672-13 D
SC No. Type
SC672-99 D
SC No. Type
SC673- D Flair connection error of Smart Operation Panel
10
The SC is issued only when the Smart Operation Panel is installed.
The main machine does not respond to the smart operation panel with the Flair
communication.
The SP setting for the smart operation panel is mismatched.
•
•
Note for the phone number:
There is a phone number column on the SC673-10 display, but the phone number is not
displayed because of this SC feature.
Other Information:
When the automatic reboot cannot be performed due to the hardware failure, SC672 or
SC673 is displayed.
The SC call is not issued.
You cannot reboot the machine manually regardless of SP5-875-002 setting.
564
Error Name/Error Condition/Major Cause/Solution
Controller start up error
The operation panel detected that the controller is down.
•
Controller stalled
•
Board installed incorrectly
•
Controller board defective
•
Operation panel connector loose, broken, or defective
•
Controller late
Refer to When SC672 (Controller start up error) is
Error Name/Error Condition/Major Cause/Solution
Controller start up error
The operation panel software ended abnormally.
•
Controller stalled
•
Board installed incorrectly
•
Controller board defective
•
Operation panel connector loose, broken, or defective
•
Controller late
Refer to When SC672 (Controller start up error) is
Error Name/Error Condition/Major Cause/Solution
Turn the main power off/on.
Set the SP5748-201 (OpePanel Setting) to [1: ON].
displayed.
displayed.