6.Troubleshooting
LED
- LED blinks when the OS is running.
[C]: Reconnecting and replacing the USB cable
Re-connect the USB cable between the IPU board and the operation panel.
1.
Release the clamp, and then make the cable straight [A].
2.
Remove the bracket [B].
3.
Re-connect the USB cable between the IPU board and the operation panel.
[A]: CABLE:USB3.0:AWG22:1600:ASS'Y
[B]: PCB:CHEETAHG2:NAIS:CO-P1.5:ASS'Y
When installing, attach the bracket [B] first, and then bend the cable [A] and secure it.
614
Note