If the paper shifts toward the rear
Slide the docking bracket backward by the amount which corresponds to that of the shift, to move the finisher in
the same direction.
e.g.: When paper has shifted by 4 mm from the center toward the rear (2 mm/division of the scale), move the
docking bracket backward by 4 mm (2 divisions).
[A]: Proof tray
[B]: Docking Bracket Screw
•
After the adjustment, check the side-to-side registration by feeding paper out to the proof tray. If the
shift has not been solved, adjust the docking bracket (screw for the docking bracket) slightly again.
For SR3210
Side-to-side registration can be adjusted by the docking bracket for SR3210 [A] (and the docking bracket screw
[B]).
1.
Eject a sheet of A4(LEF) or A3 paper to the proof tray and check how many divisions of the scale the edge of
6.Troubleshooting
619