Ricoh SP 8400DN Field Service Manual page 1723

4.Controller SP Mode Tables
Printer SP Menu
SP1-XXX (Service Mode)
1001 [Bit Switch]
1- Bit Switch 1
001-
bit DFU
001
0
bit Responding with the hostname as the sysName
1
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP C401SP"
1: Host name
bit DFU
2
bit No I/O Timeout
3
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no
affect. I/O Timeouts will never occur.
bit SD Card Save Mode
4
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.
bit [PS and PDF] Paper size error margin
5
When a PS job is printed by using a custom paper size, the job might not be printed because of a
paper size mismatch caused by a calculation error. By default, the error margin for matching to a
paper size is ±5 points. By enabling this BitSwitch, the error margin for matching to a paper size
can be extended to ±10 points.
bit DFU
6
bit [RPCS,PCL]: Printable area frame border
7
Prints all RPCS and PCL jobs with a border around the printable area.
1001 [Bit Switch]
1-001- Bit Switch 2
002
bit DFU
0
bit DFU
1
bit Applying a Collate Type
2
A collate type (shift or normal) will be applied to all jobs that do not explicitly define a collate
262
0
-
Model
name
(PnP name)
-
Disabled
Disabled
±5pt
-
Disabled
0 1
- -
- -
Shift Collate Normal Collate
1
-
Hostname
-
Enabled
Enabled
±10pt
-
Enabled