3.System Maintenance
4.
Enter the product key and press [Execute].
5.
Follow the instructions shown on the screen.
•
An application cannot be installed unless it is digitally signed by Ricoh.
Activation
1.
Log in to the control panel's service mode.
2.
Select [Apps] > [Install].
3.
Select [Activate Applications].
4.
Select the application to be activated, and then enter the activation key and press [Execute].
5.
Follow the instructions shown on the screen.
•
Only charged applications have to be activated.
Update
1.
Log in to the control panel's service mode.
2.
Select [Apps] > [Install].
3.
Select [Update Applications].
4.
Select the application to be updated, and then press [Check Update Status].
52