5.
The installation screen is displayed.
6.
The version of the firmware installed in the control panel is displayed as "Current version" and the version of
the firmware saved on the SD card is displayed as "Update version". Make sure that you have the correct
version.
7.
When "Continue Update?" is displayed, press [OK] ([EX1] key).
The update process starts.
•
To cancel the firmware update, press the [EX2] or [EX3] key.
8.
When "Install from sdcard complete." is displayed, select "reboot system now" and then press the [EX1] key
3.System Maintenance
49