Ricoh SP 8400DN Field Service Manual page 1001

Ricoh a3 size black and white laser printer.

Hide thumbs Also See for SP 8400DN:

Table of Contents

Setting items (Mac OS X):

If the driver is installed by means of the Bonjour function or "HP Jetdirect - Socket", the settings will be

automatically configured.

Automatic configuration will not work if any other protocol is used for installation. In this case, manual

configuration is required.

When manual configuration is to be performed, select "Adobe PostScript" if Adobe PS is used, and

"Emulated PostScript" if Clone PS is used.

Switching back to Clone PS from Adobe PS

Clone PS can be resumed by removing the Adobe PS card from the SD card slot and applying the firmware for

Clone PS/PDF (".fwu" or ".rfu").

Note: The work should be carried out by customer engineers.

In doing this, be sure to apply both PS3 and PDF firmware modules. If only one of them is applied, the machine

will not operate properly. (As a stopgap measure to fix the malfunction, insert the optional Adobe PS card again

into the SD card slot to enable the use of Adobe PS. Then, Clone PS can be resumed by applying both the PS3 and

PDF firmware modules once again.)

Classification

component firmware

component firmware

Firmware name

2.Installation

Software part number

Chapters

Table of Contents