Ricoh SP 8400DN Field Service Manual page 1423

No.
1 Inverter guide cover sensor
2 Paper exit full sensor
3 Reverse sensor
4 Reverse roller
5 Junction gate
Delivery location change-over
The paper transported from the fusing unit is changed over by the junction gate in the "machine paper exit/bridge
unit" direction or the "reverse tray/1 bin unit" direction.
Machine paper exit/bridge unit direction
1. The registration sensor switches ON.
2. The paper exit motor switches ON (CCW).
3. When the rear edge of the paper leaves the paper exit roller, the paper exit motor switches OFF.
No.
1
2
3
Reverse tray/1 bin unit direction
1. Registration sensor switches ON.
Description
Paper exit roller
Paper exit sensor
Junction gate
7.Detailed Descriptions
No.
6 Duplex entrance roller
7 Duplex entrance sensor
8 Paper exit sensor
9 Paper exit full feeler
10 Paper exit roller
Description
Description
685