Honda SH300 2006 Manual page 87

Check that the oil filter boss protrusion from the
crankcase is specified length as shown.
SPECIFIED LENGTH: 16 – 17 mm (0.6 – 0.7 in)
When removing the oil filter boss, apply locking
agent to the threads (page 1-16).
Install and tighten the oil filter boss to the specified
torque.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Check that the oil filter boss protrusion from the
crankcase is specified length (See above).
Apply clean engine oil to new oil filter cartridge
threads and O-ring.
Install the oil filter and tighten it to the specified
torque.
TOOL:
Oil filter wrench
TORQUE: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Refill the engine oil (page 4-11).
07HAA-PJ70101
MAINTENANCE
OIL FILTER BOSS
16 – 17 mm
(0.6 – 0.7 in)
O-RING
OIL FILTER CARTRIDGE
OIL FILTER CARTRIDGE
OIL FILTER WRENCH
4-13