Honda SH300 2006 Manual page 101

SERVICE INFORMATION
GENERAL
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is
unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and
water as soon as possible after handling used oil.
• The oil pump can be serviced with the engine installed in the frame.
• When removing and installing the oil pump, use care not to allow dust or dirt to enter the engine.
• If any portion of the oil pump is worn beyond the specified service limits, replace the oil pump as an assembly.
• For engine oil level check (page 4-10).
• For engine oil and filter change information (page 4-11).
• For oil pressure indicator inspection (page 22-15).
SPECIFICATIONS
Engine oil capacity
Recommended oil
Oil pressure at EOP (engine oil pressure) switch
Oil pump rotor
TORQUE VALUES
Oil pressure switch
Oil pump cover screw
Oil pump driven sprocket bolt
TOOLS
Oil pressure gauge set
07506-3000001
ITEM
After draining
After oil filter change
After disassembly
Tip clearance
Body clearance
Side clearance
12 N·m (1.2 kgf·m, 9 lbf·ft)
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
Oil pressure gauge attachment
07406-0030000
STANDARD
1.2 liter (1.3 US qt, 1.1 lmp qt)
1.4 liter (1.5 US qt, 1.2 lmp qt)
1.7 liter (1.8 US qt, 1.5 lmp qt)
Honda "4-stroke motorcycle oil" or an
equivalent
API service classification: SG or higher
(except oils labeled as energy conserv-
ing on the circular API service label)
Viscosity: SAE 10W-30
JASO T 903 standard: MB
2
530 kPa (5.4 kgf/cm , 77 psi) at 5,000
-1
min (rpm) (80°C/176°F)
0.15 (0.006)
0.15 – 0.22 (0.006 – 0.009)
0.02 – 0.09 (0.001 – 0.004)
Apply sealant to the threads
Apply engine oil to the threads and
flange surface
Left-hand threads
LUBRICATION SYSTEM
Unit: mm (in)
SERVICE LIMIT
–
–
–
–
–
0.20 (0.008)
0.35 (0.014)
0.12 (0.005)
5-3