Honda SH300 2006 Manual page 309

BEARING THICKNESS:
O.S. E (Blue-Blue): Thick
O.S. F (Black-Black):
O.S. G (Brown-Brown):
O.S. H (Green-Green):
Middle
A (Blue):
B (Black):
C (Brown):
D (Green): Thin
BEARING INSTALLATION
Set a new bearing onto the metal installer so that
the clearance between the end of the tool and bear-
ing is about 1.0 mm (0.04 in) on the inserting side.
TOOL:
Metal installer set
Set the bearings and special tools assembly on
inside of the crankcase, fitting the bearing edge in
the crankcase main journal.
Align the mating line of the bearings with the index
mark on the crankcase as shown.
Set the hydraulic press.
TOOLS:
Metal installer set
Driver base, 48.4 x 56 mm
1.0 mm
070MF-KTWR100
(0.04 in)
METAL
INSTALLER SET
070MF-KTWR100
07946-KM90600
CRANKCASE/CRANKSHAFT
IDENTIFICATION COLOR
BEARING
METAL
INSTALLER SET
DRIVER BASE
BOLTS
BEARING
BEARINGS
14-13