Honda SH300 2006 Manual page 386

HYDRAULIC BRAKE
Disconnect the brake hoses from the brake caliper
When removing the
by removing the oil bolts and sealing washers.
oil bolts, cover the
end of the hoses to
Remove the following:
prevent contamina-
– brake pads (page 17-13)
tion.
– two mounting bolts
– brake caliper
DISASSEMBLY
Remove the caliper bracket from the caliper body.
Remove the following from the caliper bracket:
– bracket pin boot
– pad retainer
Remove the following from the caliper body:
– caliper pin boot
– pad spring
Place a shop towel over the pistons.
Position the caliper body with the pistons down and
Do not use high
apply small squirts of air pressure to the fluid inlet
pressure air or bring
to remove the three pistons.
the nozzle too close
the inlet.
17-28
OIL BOLTS/SEALING WASHERS
MOUNTING BOLTS
PIN BOOTS
PAD SPRING
CALIPER BODY
BRAKE
HOSES
BRAKE CALIPER
CALIPER BRACKET
RETAINER