Honda SH300 2006 Manual page 322

FRONT WHEEL/SUSPENSION/STEERING
To balance the wheel, install a balance weight on
the lightest side of the rim, on the side opposite the
chalk marks. Add just enough weight so the wheel
will no longer stop in the same position when it is
spun.
Do not add more than 70 g (2.5 oz) to the wheel.
DISASSEMBLY
Remove the following:
– three torx bolts
ABS type only.
– pulser ring
Do not reuse the
torx bolts.
– six socket bolts
Do not reuse the
– brake disc
socket bolts.
– right side dust seal
– left side dust seal
15-8
BALANCE WEIGHT
PULSER RING
SOCKET BOLTS
DUST SEALS
TORX BOLTS
BRAKE DISC