Honda SH300 2006 Manual page 259

INSPECTION
WEIGHT ROLLER
Check each roller for wear or damage.
Measure the weight roller O.D.
SERVICE LIMIT: 22.5 mm (0.89 in)
MOVABLE DRIVE FACE
Check the drive face boss for wear or damage.
Measure the face bushing I.D.
SERVICE LIMIT: 30.08 mm (1.184 in)
Measure the boss O.D.
SERVICE LIMIT: 29.98 mm (1.180 in)
INSTALLATION
• Avoid getting grease or oil on the drive belt and
drive pulley faces in order to prevent belt slip-
page.
• Do not apply grease to the movable drive face
and weight rollers.
MOVABLE DRIVE FACE
DUST SEAL
DRIVE AND DRIVEN PULLEYS/CLUTCH
SLIDE PIECES
WEIGHT ROLLERS
RAMP PLATE
11-9