Honda SH300 2006 Manual page 197

COOLING SYSTEM
REPLACEMENT/AIR BLEEDING
Place the scooter on its centerstand on a level sur-
The engine must be
face.
cool before
WATER PUMP
servicing the
Remove the following:
cooling system.
– maintenance lid (page 3-4)
– luggage box (page 3-5)
– floor side cover (page 3-8)
– under cover (page 3-9)
– radiator maintenance lid (page 7-5)
Drain the coolant from the system by removing the
drain bolt, sealing washer and the radiator cap, then
disconnect the lower radiator hose and completely
drain the residual coolant.
WASHER
DRAIN BOLT
Reinstall the drain bolt with a new sealing washer.
Connect the radiator hose.
RADIATOR CAP
RADIATOR HOSE
Remove the screw and reserve tank maintenance
RESERVE TANK MAINTENANCE LID
lid.
SCREW
7-7