Honda SH300 2006 Manual page 267

Clean any oil and grease from the pulley face.
Install the movable driven face onto the driven face.
Install the rollers and guide pins.
Apply 4 – 5 g of grease (Shell ALVANIA R3 or SHIN-
NIHON POWERNOC WB3 or IDEMITSU AUTOREX B
or equivalent) to the guide grooves.
Install the seal collar onto the driven pulley.
Clean any oil and grease from the pulley face.
CLUTCH
Install the rubber dampers onto the drive plate.
Install the clutch shoes and shoe springs onto the
drive plate.
DRIVE AND DRIVEN PULLEYS/CLUTCH
MOVABLE DRIVEN FACE
(4 – 5 g)
RUBBER DAMPERS
CLUTCH SHOES
GUIDE PINS/ROLLERS
SEAL COLLAR
DRIVE PLATE
SHOE SPRINGS
11-17