Honda SH300 2006 Manual page 166

FUEL SYSTEM (PGM-FI)
Turn the slide valve clockwise until lightly seated on
IACV.
Install the IACV by aligning the pin with the slide
valve slot.
Install the set plate by aligning the tab of the IACV
with the slot of set plate as shown.
Install and tighten the torx screws to the specified
torque.
TORQUE: 2.1 N·m (0.2 kgf·m, 1.5 lbf·ft)
INSTALLATION
Install the throttle body between the connecting
hose and insulator band by aligning the throttle
body tab with insulator band groove.
Tighten the insulator band screw to the specified
torque.
TORQUE: 5 N·m (0.5 kgf·m, 3.7 lbf·ft)
6-56
IACV
SLIDE VALVE
Align
TORX
SCREWS
SET PLATE
INSULATOR
BAND SCREW
Align
SLIDE VALVE
IACV
Align
THROTTLE BODY