Measure and record the crankcase main journal I.D.
at between the main journal groove and crankcase
outer side end, and 90 degrees to the index mark.
SERVICE LIMIT: 45.060 mm (1.7740 in)
Depending upon the results of the above measure-
ments there are four possible scenarios for main
bearing selection:
• Crankshaft and crankcase are replaced
• Crankcase only is replaced
• Crankshaft only is replaced
• Main bearings only are replaced
Carefully refer to the following instructions and
tables for main bearing selection.
Record the bearing support I.D. code letter.
• Letters A or B on each crankcase is the code for
the crankcase I.D.
Record the main journal O.D. code number.
• Letters 1, 2 or 3 on each crank weight is the code
for crankshaft journal O.D.
Cross-reference the crankshaft and crankcase codes
to determine the replacement bearing color.
CRANKCASE/CRANKSHAFT
90°
BEARING SUPPORT I.D. CODE LETTER
MAIN JOURNAL O.D. CODE NUMBERS
INSIDE
OUTSIDE
14-11