Honda SH300 2006 Manual page 345

Tighten the steering stem adjusting nut to the speci-
Refer to torque
fied torque using the specified tool.
wrench reading
information, on ser-
TOOL:
vice information
Pin spanner
(page 15-3).
TORQUE:
Actual: 25 N·m (2.5 kgf·m, 18 lbf·ft)
Indicated: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Turn the steering stem left and right, lock-to-lock
several times to seat the bearings.
Loosen the steering stem adjusting nut fully and fin-
ger tighten it all the way.
Turn the inner race counterclockwise 45° (1/8) from
above (finger tightened) position.
Install the lock nut.
Tighten the lock nut while holding the steering stem
adjusting nut.
TOOLS:
Socket wrench
Pin spanner
TORQUE: 68 N·m (6.9 kgf·m, 50 lbf·ft)
Make sure the steering stem moves smoothly, with-
out play or binding.
FRONT WHEEL/SUSPENSION/STEERING
07702-0020001
07916-KM10000
07702-0020001
ADJUSTING NUT
PIN SPANNER
ADJUSTING NUT
SOCKET WRENCH
PIN SPANNER
LOCK NUT
15-31